The Roller Table is used for manual sorting and for cleaning the fruit. 

The axes of the rotating, gripped rollers clip into two lateral chains. The chains are driven by a variable gear motor and move the rollers horizontally along the table. The rotation of the rollers can be switched on or off by a tension bar. The gap between the rollers is 15 mm wide. Underneath the roller belt are sliding trays mounted for collecting and discharging dirt and water. The operators stand alongside the table at an ergonomic working height. 

 
The fruits are fed onto the belt, preferably in a single layer, sprayed with water and moved forward according to the chain speed. Dirt falls through the gaps between the rollers and discharges via the sliding trays. When rotation is activated, the fruits turn, which enables complete visual inspection by the operators. Non-compliant fruits can then be removed. 

Roller Table 600 x 2500

• Belt length: 2500mm 

• Belt width: 600mm 

• Sorting height: 920mm 

• Motor (variable gear drive): 0.75 kW/ 400 V / 50Hz 

• Conveying speed: 0.08–0.41m/s 

• Capacity: 4–20 t/h 

Roller Table 800 x 3500

• Belt length: 3500mm 

• Belt width: 800mm 

• Sorting height: 920mm 

• Motor (variable gear drive): 1.5 kW/ 400 V / 50Hz 

• Conveying speed: 0.13–0.67m/s 

• Capacity: 8–40 t/h